Products

products

Products

JHRB-P Electric Dry Oil Pump

JHRB-P Electric Dry Oil Pump

JHRB-P series electric dry oil pump is suitable for single and double line dry thin oil centralized lubrication system with high lubrication frequency, large pipe length and dense lubrication points, as a conveying device to supply grease It can also be

24-hour hotline: +86-0513-83777434+86-0513-68202954
Product Introduction

Overview:

JHRB-P series electric dry oil pump is suitable for single and double line dry thin oil centralized lubrication system with high lubrication frequency, large pipe length and dense lubrication points, as a conveying device to supply grease. It can also be equipped with mobile car, hose, oil gun and cable composed of mobile electric lubrication pump device, which is suitable for low lubrication frequency, less lubrication point, large oil supply, not easy to use single equipment of centralized lubrication, mobile grease lubrication.
This series of lubrication pump is electric high pressure plunger type. The working pressure can be adjusted freely within the nominal pressure range, with double overload protection. The oil storage drum is equipped with an automatic oil level alarm device. If the lubrication pump is equipped with an electrical control box, the automatic control of the two-line centralized lubrication system can be realized, and the monitoring of the system can be realized.

Parameter:

Type Number
Nominal Pressure
MPa
Rated Fuel Feed
mL/min
Reservoir Volume
L
Motor
Applicable Ambient Temperature
Weight
kg
Power
kW
Voltage
JHRB1-P120Z
40
120
30
0.37
380
0~80
56
JHRB2-P120Z
0.75
-20~80
64
JHRB3-P120Z
60
0.37
0~80
60
JHRB4-P120Z
0.75
-20~80
68
JHRB5-P235Z
235
30
1.5
  
0~80
70
JHRB6-P235Z
60
74
JHRB7-P235Z
100
82
JHRB8-P365Z
365
60
74
JHRB9-P365Z
 
100
82

The medium used is the lubricating grease (NLGI0#-3#) with cone penetration not less than 220 (25℃, 150g) 1/10mm and the lubricating oil with viscosity class greater than N68.

Related Products